Honda V-Twin-iGX800 W/EFI 10.0 GPM 3000 PSI HD SS Skid Mount Belt SB1030HG-SS

Overview

The SB1030HG-SS is a belt-drive cold water skid pressure washer that puts out 10.0 GPM at 3000 PSI, built on a US-made 304 stainless steel frame. Power comes from a Honda V-Twin iGX800 electronic fuel injected engine with drive-by-wire throttle and LED diagnostics, driving a GP General Pump TSF2221 through a 4-groove bonded cog V-belt. The pump runs at a low 1750 RPM, which means less heat and wear over long shifts, and a thermo-sensor prevents overheating in bypass. With a 1.5" barbed inlet and a 10 ft bypass return hose, it's built to tank-feed from a trailer, deck, or truck bed. The same unit can also be set up as a 10.0 GPM drain jetter — a strong fit for high-flow flatwork, fleet washing, and contractors who want maximum coverage per pass.

What's included

• Honda V-Twin iGX800 EFI gas engine — drive-by-wire throttle, LED diagnostics, 26 Amp charger, EPA compliant
• GP General Pump TSF2221 belt-drive pump running at a low 1750 RPM for long service life
• 4-groove bonded cog V-belt drive minimizes slippage and improves power transfer
• US-made 304 stainless steel skid base with four isolation dampers
• Tank-feed ready: 1.5" barbed high-flow inlet plus 10 ft x 1/2" bypass return hose
• Includes HD gun/wand assembly, 50' high-pressure hose with QC couplers, and four nozzles (0-15-25-40 degree)
• VRT100-330D stainless 26.4 GPM unloader with thermo-sensor bypass overheat protection
• Can be set up as a 10.0 GPM drain jetter-cleaner
• Dual oil drains for pump and engine; marine-grade battery box and cables included

Specifications

Pressure (PSI)

3000 to 3999

Flow (GPM)

9.0+

Engine

Honda

Horsepower

15 to 20+

Drive

Belt

Pump

GP General Pump TSF2221, belt drive, 1750 RPM

Unloader

VRT100-330D stainless steel, 26.4 GPM

Frame

US-made 304 stainless steel skid with (4) isolation dampers

Inlet

1.5" barbed (tank feed)

Outlet

1/2" QC male plug on discharge

Hose Length

50 ft high-pressure hose with QC couplers

Nozzles

4 quick-connect: 0, 15, 25, 40 degree

Bypass Hose

10 ft x 1/2" return-to-tank