$7,599.00
- Jobs that need high pressure with heat: 4000 PSI
- Trailer, deck or truck-bed rigs fed from your own tank
- Running in the field with no external power
Free Shipping over $199 · In-Stock & Ready to Ship
6 to 10 GPM of hot water on Honda power, with a Beckett burner and a Schedule 80 coil. Battery and fuel tank on board, so it runs anywhere.
From$7,599· 6 models
Six skids on one frame. More flow rinses faster; more pressure cuts harder. Each comes with an AR or a General pump.
| Model | Flow | Pressure | Engine | Pump | Price |
|---|---|---|---|---|---|
| 6 GPM 4000 PSI · AR | 6 GPM | 4,000 PSI | Honda GX690 | AR, belt | $7,599 |
| 7 GPM 4000 PSI · AR | 7 GPM | 4,000 PSI | Honda GX690 | AR, belt | $7,999 |
| 8 GPM 3500 PSI · General | 8 GPM | 3,500 PSI | Honda GX690 | General, belt | $7,999 |
| 8 GPM 3500 PSI · AR | 8 GPM | 3,500 PSI | Honda GX690 | AR, belt | $7,799 |
| 10 GPM 3000 PSI · General | 10 GPM | 3,000 PSI | Honda iGX800 | General, belt | $8,799 |
| 10 GPM 3000 PSI · AR | 10 GPM | 3,000 PSI | Honda iGX800 | AR, belt | $8,699 |
The 6 and 7 GPM skids run 4,000 PSI for jobs that need cutting power. The 8 GPM skids run 3,500 PSI, and the 10 GPM skids step up to a Honda iGX800 for the most water at 3,000 PSI. More flow moves dirt and rinses faster; more pressure breaks it loose.
Every skid carries its own battery and a 12-gallon fuel tank, so it runs in the field with no external power. Feed it from your own water tank.
All six share a 50" x 33" x 50" aluminum frame with a stainless steel sub-frame and forklift pockets, sized for a trailer, deck or truck bed.
No. Every skid carries its own battery and a 12-gallon fuel tank, so it runs anywhere you can bring water.
50"L x 33"W x 50"H, on a low-profile aluminum frame with a stainless steel sub-frame, forklift pockets and lifting provisions.
Not in this configuration: the poly fuel tank isn't CARB compliant. A California-compliant upgrade is offered separately; call us.
Talk to a real expert
Our equipment experts
150+ years combined on the equipment
Skip the chatbot maze. Call and you get a specialist who can size the right unit, match the exact part, and match the right sealer. Usually faster than figuring it out yourself.