Downstream Bypass 6-10 GPM @ 20% Chem Injector 1/2" QCs

Overview

This is a fully assembled downstream bypass chemical injector for 6-10 GPM cold and hot water pressure washers, built around a 20% fixed GP injector body with a 2.3mm orifice. The bypass design delivers higher concentrations of liquid chlorine or other cleaning chemicals at longer distances and higher elevations, with none of the pressure loss you get from a typical downstream injector — and chemical never runs through the pump. The kit includes a plated ball valve, plated 1/2" quick couplers (for 1/2" ID hose), an inlet strainer with 48" chemical suction hose, and a 24" high-pressure bypass hose. It's an economical setup for heavy-use or entry-level soft-wash work on your existing machine, letting you alternate between chemical application and rinse with no flow restriction.

What's included

• 20% fixed downstream injector body with 2.3mm orifice
• Sized for 6-10 GPM cold and hot water pressure washers
• Bypass design — switch between chemical and rinse with no pressure loss
• Chemical does not run through the pump
• Plated ball valve and plated 1/2" quick couplers for 1/2" ID hose
• 48" x 1/4" chemical suction hose with inlet strainer
• 24" high-pressure bypass hose
• Stainless inlet metering ball and zinc-plated steel fittings

Specifications

Flow Range

6-10 GPM

Chemical Draw

20% (fixed)

Injector Orifice

2.3mm

Quick Couplers

Plated 1/2", for 1/2" ID hose

Chemical Suction Hose

48" x 1/4" with inlet strainer

Bypass Hose

24" high-pressure

Metering Ball

Stainless steel

Fittings

Zinc-plated steel