Downstream Fixed 10% 2 – 3 GPM Chemical Draw Injector Assy W/ QCs

Overview

This is a downstream chemical injector with a fixed 10% dilution ratio, built for pressure washers flowing 2–3 GPM and rated to 4500 PSI maximum. It quick-connects inline after the pump and before your 3/8" high-pressure hose, drawing soap only when you switch to a low-pressure soap nozzle — a size 40.0 black short-range tip or blue long-range tip. Because the chemical enters the line downstream, it never runs through the pump, which protects your seals and lets you run a wider range of chemicals. It ships with 4 feet of draw hose with a strainer. If yours arrives plumbed backwards, just swap the fittings so the flow arrow points downstream, away from the machine.

What's included

• Fixed 10% dilution ratio
• Rated 4500 PSI maximum at 2–3 GPM flow
• Quick connects snap on and off between the pump and the 3/8" high-pressure hose
• Chemical never runs through the pump — protects seals and allows a wider choice of chemicals
• Includes 4 feet of draw hose with strainer
• Draws soap at low pressure with a size 40.0 black (short-range) or blue (long-range) nozzle
• Reversible fittings — if plumbed backwards, swap them so the flow arrow points downstream

Specifications

Type

Downstream chemical draw injector

Dilution Ratio

Fixed 10%

Flow Range

2–3 GPM

Max Pressure

4500 PSI

Connection

Quick connects — installs after the pump, before the 3/8" high-pressure hose

Soap Nozzle Size

40.0 (black short-range or blue long-range)

Included Hose

4 ft draw hose with strainer