Call us now: 800-493-7692
American Pressure Systems

Search

Search pressure washers, parts, and sealers

APS PartsSKU: D10002

QC-SOCKET-1/4-M

$4.45

$17.99 shipping · free on orders of $199 or more

VisaMastercardAmexDiscoverZelle & ACH also accepted — call 800-493-7692

A 2% fuel surcharge and 3.9% processing fee are added at checkout.

Ready to ship
Free over $199
Warranty
Financing available

Low Price Guaranteed

Found it cheaper somewhere else? We'll match it. Call 800-493-7692 and we'll beat the deal.

Overview

This is a 1/4-inch brass male quick-connect socket for pressure washers — the coupler half of a standard quick-connect pair. Snap a matching 1/4-inch quick-connect plug into it and you can swap nozzles, lances, hoses, and accessories in seconds instead of threading and taping fittings every time. Brass construction holds up to routine pressure-washing use and resists corrosion better than plated steel. It's a common replacement when an old coupler starts leaking or the collar wears out, and a cheap upgrade if your machine still uses threaded-only connections. Pair it with a 1/4-inch quick-connect plug on the mating side to complete the connection.

What's included

  • Brass construction — corrosion-resistant for pressure-washer service
  • 1/4 in. size — pairs with standard 1/4 in. quick-connect plugs
  • Socket (coupler) half of a quick-connect pair
  • Tool-free connect/disconnect for nozzles, lances, and hoses
  • Direct replacement for a worn or leaking coupler

Specifications

Type
Quick-connect socket (coupler), male
Size
1/4 in.
Material
Brass
Application
Pressure washer

Frequently asked questions

It accepts a standard 1/4-inch quick-connect plug — the mating half of the pair. Put the plug on your nozzle, lance, or hose end and it snaps into this socket, letting you change attachments without wrenches or thread sealant.

The socket is the coupler body with the spring-loaded collar; the plug is the stem that snaps into it. You need one of each to make a connection — this listing is the socket half.

Brass resists corrosion from water and detergents better than plated steel, so the coupler keeps sealing and releasing smoothly over time. It's the standard material for pressure-washer quick-connect fittings in this size.

Check the fitting you're replacing or the connection on your gun, lance, or nozzle — 1/4 inch is the most common size for pressure-washer nozzle and lance connections. If you're unsure, call APS with your machine's model and we'll confirm the right fitting.

Talk to a real expert

Our equipment experts

150+ years combined on the equipment

Talk to someone who actually knows the machine

Skip the chatbot maze. Call and you get a specialist who can size the right unit, match the exact part, and match the right sealer. Usually faster than figuring it out yourself.

Mon–Fri 8am–5pm ET Family-owned, US-based
800-493-7692 Message an expert

Complete the setup

4.0-4.5 GPM Downstream JROD W/ 2 Each Chem Application & 2 Each SS Rinse Nozzles

4.0-4.5 GPM Downstream JROD W/ 2 Each Chem Application & 2 Each SS Rinse Nozzles

SKU: DSJROD 4-4.5 GPM

$49.95
5.0-5.5 GPM Downstream JROD W/ 2 Each Chem Application & 2 Each SS Rinse Nozzles

5.0-5.5 GPM Downstream JROD W/ 2 Each Chem Application & 2 Each SS Rinse Nozzles

SKU: DSJROD 5-5.5 GPM

$49.95
6.0-6.5 GPM Downstream JROD W/ 2 Each Chem Application 2 Each SS Rinse Nozzles

6.0-6.5 GPM Downstream JROD W/ 2 Each Chem Application 2 Each SS Rinse Nozzles

SKU: DSJROD 6-6.5 GPM

$49.95
7.0-7.5 GPM Downstream JROD W/ 2 Each Chem Application 2 Each SS Rinse Nozzles

7.0-7.5 GPM Downstream JROD W/ 2 Each Chem Application 2 Each SS Rinse Nozzles

SKU: DSJROD 7-7.5 GPM

$54.95