Ameri-Seal High Performance Protective Sealer - Wet Look Semi Gloss

Overview

Ameri-Seal Wet Look Semi Gloss is a 1-part, water-based protective sealer that gives concrete and brick pavers the deep, color-enhanced "wet look" of a solvent-based sealer without the fumes or application restrictions. The 5-gallon pail covers 1000-1500 sq ft, and two thin coats deliver the best color enhancement and protection. It penetrates the surface and cures to a tough semi-gloss film that deepens color, binds joint sand, and guards against water damage, staining, UV fading, and mildew. Because it tolerates damp pavers, you can pressure wash and seal the same day — a real schedule advantage for contractors. Low VOC (under 50 g/l), it also works on decorative concrete, slate, Saltillo tile, and clay roof tiles, and holds up under foot and vehicle traffic.

What's included

• Rich wet-look semi-gloss finish that deepens paver color
• Solvent-based appearance from a low-VOC (< 50 g/l) water-based formula
• Applies to damp pavers — clean and seal the same day
• Binds joint sand for a unified surface
• Resists water damage, staining, UV fading, and mildew
• Handles heavy foot and vehicle traffic
• 5-gallon pail covers 1000-1500 sq ft
• Works on concrete and brick pavers, decorative concrete, slate, and Saltillo tile

Specifications

Size

5 gallons

Coverage

1000-1500 sq ft

Finish

Semi-gloss wet look

VOC Content

< 50 g/l

Touch Dry

30-60 minutes

Recoat Time

2 hours

Foot Traffic

24 hours

Vehicle Traffic

72 hours