Ameri-Seal Protective Sealer Wet Look High Gloss - 2-Part Chemical Resistant For

Overview

Ameri-Seal Wet Look High Gloss is a 2-part aliphatic acrylic urethane sealer that lays down a chemical-resistant, high-gloss wet-look finish rivaling solvent-based sealers. Because it's a two-component system, you tune the gloss through the mix ratio — 4A:1B:2.5 water for maximum performance down to 4A:1B:10 for maximum reduction — anywhere from subtle enhancement to a mirror-like wet look. It won't yellow, protects decorative flakes, applies to damp surfaces, and binds paver joint sand permanently. At 50% solids with under 100 g/l VOC and 1,000–2,000 sq ft per gallon coverage, it's built for commercial garage floors, high-end driveways, decorative flake systems, pool decks, and brick pavers. Touch dry in 30–60 minutes; vehicle-ready in 48 hours.

What's included

• 2-part aliphatic acrylic urethane — high gloss that rivals solvent-based sealers
• Adjustable gloss via mix ratio: 4A:1B with 2.5 to 10 parts water
• Chemical, abrasion, and UV resistant — won't yellow over decorative flakes
• Applies to damp surfaces for same-day application
• Binds paver joint sand permanently
• 2-3 hour pot life; touch dry in 30-60 minutes, recoat in 2 hours
• 50% solids, low VOC (under 100 g/l)
• Covers 1,000-2,000 sq ft per gallon

Specifications

Formula

2-part aliphatic acrylic urethane

Mix Ratio (Maximum Performance)

4A : 1B : 2.5 water

Mix Ratio (Standard Performance)

4A : 1B : 5 water

Mix Ratio (Maximum Reduction)

4A : 1B : 10 water

Coverage

1,000–2,000 sq ft per gallon

Solids

50% by weight

VOC Content

< 100 g/l

Pot Life

2–3 hours

Touch Dry

30–60 minutes

Recoat Time

2 hours

Foot Traffic

24 hours

Vehicle Traffic

48 hours